HG series

The HG series features a grid style top plate and are most commonly used on medium and large grinders and are also recommended for milling and planing operations. These chucks have evenly distributed magnetic holding over the entire surface and have rectangular pole pieces that are properly sized to yield maximum holding for your application. All sizes are also available with grid-to-one edge, magnetic poles extended over front or back edge, and, grid-to-two edge, magnetic poles extended over both front and back edges. The HG series also has a grid-to-all edge option to maximize holding area on the top plate.

Standard HG model sizes range from 5” x 10” to as large as 48” x 72”. The maximum recommended length for a magnetic chuck is 60”. For larger sizes use
combination of standard sizes in tandem or end-to-end mounting. When using
chucks in tandem, it is essential that all chucks remain parallel. If one of them
needs to be replaced, all of them will need to be re-ground together to achieve
a level machining table.